Q: will this work on a black and decker GH3000 electric string trimmer?

Asked by: frustrated - 9/3/2013
A: These are really meant to be used on gas trimmers. All of the hardware included may allow you to attach it, but electric versions are not powerful enough to use it effectively. It will fit 100% of gas powered models, and it is recommended for use on that kind only.

UPDATE: THE CURRENT VERSION OF THIS TRIMMER HEAD IS FULLY COMPATIBLE WITH A WIDE RANGE OF BATTERY OPERATED TRIMMERS.
Was this answer helpful?  34 of 39 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/3/2013)
Submit an answer

Q: will your product work on electric trimmers?

Asked by: mike - 9/5/2013
A: No. It is not designed for electric versions. Buy for replacement of any gas powered trimmer head. With the included hardware and adapters, it fits them all.

UPDATE: THE CURRENT VERSION OF THIS TRIMMER HEAD IS FULLY COMPATIBLE WITH A WIDE RANGE OF BATTERY OPERATED TRIMMERS.
Was this answer helpful?  15 of 18 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/6/2013)
Submit an answer

Q: Will this work on Electric Trimmers or only Gas? I have a Worx trimmer. Thanksw.

Asked by: Gene - 9/29/2013
A: It is not ideal for that model. This replacement head is really intended for trimmers with gas powered motors, and many electric ones will not have enough power for it to work properly. It comes with any hardware you would need for gas versions, but may not adapt to your tool without additional stuff. Proceed with caution.

UPDATE: THE CURRENT VERSION OF THIS TRIMMER HEAD IS FULLY COMPATIBLE WITH A WIDE RANGE OF BATTERY OPERATED TRIMMERS.
Was this answer helpful?  13 of 16 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/30/2013)
Submit an answer

Q: I have two weed eaters one is a BC509 29cc Cub Cadet will this head fit it? I also have a TB525c Troybilt Horse will this head fit this also?

Asked by: John - 9/8/2013
A: Yes. It will fit either of those models.
Was this answer helpful?  11 of 11 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/9/2013)
Submit an answer

Q: how do I change the head on an echo straight shaft trimmer ?

Asked by: petey - 9/5/2013
A: Installation is super easy for your model. It will be slightly different depending on if you have a shaft extension or not, but both directions will be listed below, so chose whichever applies.

WITH EXTENSION

1) Turn knob to loosen and take off existing trimmer head assembly.

2) Unscrew the SHAFT EXTENSION to expose the shorter, primary shaft.

3) Locate the right nut from the included hardware by seeing which one EASILY screws into place.

4) Stick that nut down into the recessed hex-shaped hole and hold in place with your finger.

5) While holding the nut in place, turn the whole head to screw the PivoTrim onto the shaft.

NO EXTENSION

1) Consult your owners manual to find out how to lock shaft rotation, then go ahead and lock it. (May be a key hole or a nut).

2) Unscrew your existing trimmer head assembly by hand to expose the threaded shaft. (May be left-hand threads, so try turning both ways if needed).

3) Sift through the pile of included nuts to determine which threads EASILY onto the shaft.

4) Place the nut you found into the recessed recessed hex cavity of the doughnut-looking head.

5) Hold the nut in place with your finger, and then tighten the PivoTrim onto the shaft by turning it with shaft rotation locked.
Was this answer helpful?  10 of 11 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/6/2013)
Submit an answer

Q: Will this work on a stihil trimer PD 45 and FS56?

Asked by: Larry Cervenka - 6/26/2014
A: Yes.
Was this answer helpful?  9 of 12 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/7/2014)
Submit an answer

Q: will your product fit a cub cadet cc5075?

Asked by: TONY - 9/3/2013
A: Yes. Not to worry. It will fit your model.
Was this answer helpful?  7 of 7 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/4/2013)
Submit an answer

Q: How do I change the head on trimlite Homelite gas trimer by John Deer?

Asked by: Greg - 10/4/2013
A: Assuming you are working with a curved shaft, removable spool and short mounting shaft, you would use the following method.

1) Unscrew and take off the spool assembly to expose the threaded shaft.

2) Find the right nut from the bag of hardware.

3) Stick the nut into the recessed cavity.

4) Hold the nut in place and then screw on this replacement head until tight.

5) For this model, try with two lines first.
Was this answer helpful?  6 of 8 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (10/8/2013)
Submit an answer

Q: will this work on a murray 25cc bent shaft trimmer? It has a spring lock washer instead of a nut.

Asked by: dseal1 - 10/11/2013
A: Yes. It should work fine with your model.
Was this answer helpful?  6 of 8 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (10/11/2013)
Submit an answer

Q: will there ever be a head that will work on the electric/battery trimmers? I cannot start the gas ones and I hate changes the string

Asked by: marcia - 7/19/2014
A: It's in the works, but at this time, we do not carry a model designed for use on electric trimmers.

UPDATE: THE CURRENT VERSION OF THIS TRIMMER HEAD IS FULLY COMPATIBLE WITH A WIDE RANGE OF BATTERY OPERATED TRIMMERS.
Was this answer helpful?  6 of 6 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/23/2014)
Submit an answer

Q: Will this work with a Weedeater Featherlite Plus 26? Thanks!

Asked by: Tom - 9/10/2013
A: Yes. It is guaranteed to fit your trimmer. Easy to follow instructions will walk you through the process, and the included bag of hardware will give you everything you need for adaptation.
Was this answer helpful?  5 of 8 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/10/2013)
Submit an answer

Q: Does it screw onto a 5/16" bolt? Most replacement heads I've found are for 3/8", and don't fit my Poulan. Why not put thread information on your spec page instead of saying it will fit all units, when in fact it may not?

Asked by: Dick - 10/19/2013
A: Yes. It will work for your model. Sorry for not making this more clear. There will be different nuts and adapter pieces included to fit any gas trimmer out there, and certainly yours. No one install will ever use them all, but you will be guaranteed that it fits, and you have the parts necessary to replace the factory head on your trimmer.
Was this answer helpful?  5 of 11 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (10/21/2013)
Submit an answer

Q: will this fit on a Ryobi curved shaft,expand-it?

Asked by: Ralph - 7/19/2014
A: Yes. It should be compatible with this model.
Was this answer helpful?  5 of 6 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/23/2014)
Submit an answer

Q: will it fit a southland xl?

Asked by: jean - 9/21/2013
A: Yes. It should, but to be safe, give the manufacturer a call to verify: 866 212 7466
Was this answer helpful?  4 of 6 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/23/2013)
Submit an answer

Q: what is the thickness of strings?

Asked by: big boy - 7/6/2014
A: .095
Was this answer helpful?  4 of 5 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/7/2014)
Submit an answer

Q: Is the PIVO-TRIM PRO compatible with Sears Craftsman gas trimmers?

Asked by: Pete - 7/13/2014
A: Yes. Both regular and pro versions will fit any model in the Craftsman line.
Was this answer helpful?  4 of 6 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/23/2014)
Submit an answer

Q: WILL THIS PIVOTRIM HEAD FIT ON MY Honda four stroke trimmer?

Asked by: sol - 7/16/2014
A: Yes it will.
Was this answer helpful?  4 of 5 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/23/2014)
Submit an answer

Q: will the PivoTrim head work on a TB475SS?

Asked by: Dave - 10/7/2013
A: It sure will. Order with confidence for a perfect fit with this Troy Built, 4-cycle model.
Was this answer helpful?  3 of 6 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (10/8/2013)
Submit an answer

Q: will this work on a feather light weedeater fl25c and does it have enough power not to bog the engine down running this style head?

Asked by: jimmie c - 5/14/2014
A: Yes. It should fit your model. For equipment with less powerful motors, it is suggested to use 2 strings instead of 4. If it's not working as advertised, fully loaded, just take a couple lines off the spool, and it will perform much better due to the reduced weight.
Was this answer helpful?  3 of 3 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/19/2014)
Submit an answer

Q: Will the pivotrim fit my Stahl fs36?

Asked by: kabo - 8/21/2014
A: Unfortunately, it does not.
Was this answer helpful?  3 of 6 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (8/28/2014)
Submit an answer

Q: the eyes that the string fits thur have worn out and wont hold line .where can i find replacement?

Asked by: jay - 9/25/2014
A: You can find replacement sets here: http://www.simplygoodstuff.com/pivotrim-eyelet-4pack.html
Was this answer helpful?  3 of 4 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/29/2014)
Submit an answer

Q: Will this head work on my Stihl fs36 with 1/2 inch male shaft?

Asked by: Larry - 7/27/2015
A: Customers have had compatibility problems with this specific model.
Was this answer helpful?  3 of 4 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/30/2015)
Submit an answer

Q: will it fit my fs70r stihl ?

Asked by: Ron easley S.C. - 9/6/2015
A: Yes.
Was this answer helpful?  3 of 3 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/6/2015)
Submit an answer

Q: Will it work on a troy built TB70SS?

Asked by: RJT - 6/1/2014
A: Yes. It will attach to this model perfectly.
Was this answer helpful?  2 of 2 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/2/2014)
Submit an answer

Q: I bought his unit some time ago ,it was said that the strings would be replaced at no charge, how do I get the free replacements?

Asked by: John - 6/10/2014
A: That was an offer run on TV that we are not affiliated with. The "free" line offered comes with a hefty shipping cost, so paying for line from us is actually cheaper than getting the "free"stuff.
Was this answer helpful?  2 of 3 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/12/2014)
Submit an answer

Q: WILL THIS TRIMMER HEAD WORK WITH A STIHL FS 55R TRIMMER?

Asked by: JIM - 7/27/2014
A: Yep. No compatibility problems with that model.
Was this answer helpful?  2 of 4 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/28/2014)
Submit an answer

Q: Will the PIVO Trim fit a Stihl FS 74 Trimmer?

Asked by: Gene - 8/4/2014
A: Yes.
Was this answer helpful?  2 of 2 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (8/18/2014)
Submit an answer

Q: will this trimmer cut ivy? I have alot of it, around rocks etc. do i need to get a pro?

Asked by: star - 8/11/2014
A: Yes. It will cut ivy. The pro does not really offer more cutting power, it's just more durable so it will last longer with frequent use.
Was this answer helpful?  2 of 2 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (8/18/2014)
Submit an answer

Q: How can I attach to my Craftsman electric weed wacker?

Asked by: - 6/20/2015
A: It DOES NOT work on electric trimmers.
Was this answer helpful?  2 of 2 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/23/2015)
Submit an answer

Q: will it work on a murray model ms 2560 straight shaft trimmer ?

Asked by: Wayne Ball - 5/31/2014
A: Yes it will.
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/2/2014)
Submit an answer

Q: you advertise on tv that you get free line for life plus line for cuting bush. is that true? doesnt look like it online.56s70y700 /

Asked by: ed - 6/17/2014
A: What you see, it what you get. We do not offer any "free" products, and we also don't charge shipping for each and every item in the box. You could purchase based on "deals" being offered, but you may end up spending more. With the "free" line specifically, our replacement line is actually cheaper once you factor in the shipping cost.
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/7/2014)
Submit an answer

Q: Will this fit on a DR Trimmer 675 series (gas weed eater)?

Asked by: Rene Perry - 6/28/2014
A: Yes.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/7/2014)
Submit an answer

Q: Will this work on a weedeaster featherlight?

Asked by: Irene - 7/4/2014
A: Yes it will.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/7/2014)
Submit an answer

Q: Will this work on a think wheeled trimmer?

Asked by: lee - 7/16/2014
A: Yes. It should be compatible with this model.
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/24/2014)
Submit an answer

Q: Will it work on a 10 amp corded electric trimmer?

Asked by: Ralph Jurga - 7/23/2014
A: No. It will not be compatible with your electric trimmer. Sorry.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/23/2014)
Submit an answer

Q: Will the pivotrim fit my Stahl fs36?

Asked by: kabo - 8/21/2014
A: The shafts on the FS36 is too large for the pivotrim to fit over. The only way it would fir is if you were to drill the pivotrim head, spacer, etc out to the same diameter still shaft, them find a nut that fits the shaft.
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: Kyle (7/31/2015)
Submit an answer

Q: I have a Black & Decker electric weed eater will it work on that ?

Asked by: Tom - 9/15/2014
A: No. It will not be compatible with your electric trimmer.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/16/2014)
Submit an answer

Q: Troy Built (TB22EC) will your product fit?

Asked by: Randy - 10/14/2014
A: Yes it will.
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (10/14/2014)
Submit an answer

Q: what is the cutting swath, in inches, of the trimmer head?

Asked by: newbie - 6/15/2015
A: About 14"
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/15/2015)
Submit an answer

Q: will this pivotrim head fit on my sthil F5 45?

Asked by: ROSS - 7/27/2015
A: Yes. It should fit just fine.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/27/2015)
Submit an answer

Q: will this trimmer work on a gas stihl trimmer ?

Asked by: jim - 8/9/2015
A: Yes it will.
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (8/9/2015)
Submit an answer

Q: How do I change the head on trimlite Homelite gas trimer by John Deer?

Asked by: Greg - 10/4/2013
A:



i think you meant "bolt" not nut.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: (6/5/2017)
Submit an answer

Q: will it be o.k. for styl curved shaft?

Asked by: jerry - 11/26/2013
A: Yes. Yes it will.
Was this answer helpful?  0 of 3 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (11/27/2013)
Submit an answer

Q: how do I order more line? Thanks, Sterling

Asked by: Sterling Wheeler - 6/4/2014
A: You can find it here: replacement line
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/12/2014)
Submit an answer

Q: My daughter purchased a Homelite gas trimmer, model UT33600A last year along with a Pivotrim X4 trimmer head, however while using the trimmer last year the head came off and parts went flying. I'm attempting to put it back together but there is parts missing but I have no idea what they are. I've noticed there's a universal installation kit that comes with the Pivotrim X4 which I believe probably contains the missing parts. is it possible to purchased just the universal installation kit?

Asked by: Roger - 6/29/2014
A: Unfortunately, we do not have a parts kit available at this time. That being said, if you do know the part or parts you need, we may have it available in our warehouse, so please give us a call. If available, we would be happy to ship you just what you need.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/7/2014)
Submit an answer

Q: how do I swap this out on a husqavarna 224L?

Asked by: lars - 7/13/2014
A:
  1. Consult owners manual to determine method to lock shaft rotation. (Could be a key hole or require a wrench).

  2. Unscrew entire trimmer head assembly by hand to expose threaded shaft. (May be left-hand threads).

  3. Identify which nut from the package threads easily onto shaft.

  4. Place identified nut into recessed hex cavity of the trimmer head.
    **Use 1/4 " plastic washer.

  5. Hold nut in place with finger, and secure tighten the PivoTrim onto the shaft by turning the head with shaft rotation locked.

Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/24/2014)
Submit an answer

Q: will it fit on a cub cadet bc210?

Asked by: Denny - 7/18/2014
A: Yes.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/23/2014)
Submit an answer

Q: Does it work on a bolen weed trimmer?

Asked by: larry - 7/26/2014
A: Yes.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/28/2014)
Submit an answer

Q: will this fit on an 18 inch yard machine?

Asked by: paulkitchens - 7/26/2014
A: Yes. It will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/28/2014)
Submit an answer

Q: Does the piotrim work on craftsman 8 in 1 gas trimmer and how do i install it, the shaft is not threaded?

Asked by: David - 8/19/2014
A: Yes it will. Installation will be similar to other models.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (8/28/2014)
Submit an answer

Q: will it work on a murry 2500 gas trimmer?

Asked by: George - 9/1/2014
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/16/2014)
Submit an answer

Q: will this head work on a shindawa?

Asked by: woody - 10/2/2014
A: Yes. It should work just fine on that brand.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (10/2/2014)
Submit an answer

Q: I have a Weed Eater XT20T string trimmer. The stringhead attaches to the drive shaft with a RIGHT-HANDED THREAD. Will the PivoTrim fit my trimmer?

Asked by: Elsie - 4/26/2015
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/26/2015)
Submit an answer

Q: how to install this head on murray m2500 ?

Asked by: rodger - 4/27/2015
A: Just follow the standard curved shaft instructions included with the trimmer head when it arrives. If you need further assistance, please give us a call.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/27/2015)
Submit an answer

Q: Will the Pivotrim head fit a Troy-Bilt Model TB22-EC?

Asked by: Kevin Jones - 5/1/2015
A: Yes it will.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/1/2015)
Submit an answer

Q: When will you have the bottom covers only for sale? I have worn out 6 bottom covers but have all the other parts left over. It's wrong to buy a whole unit for $19 when all you need is a cover that should be $4.00 or less.

Asked by: Les Nichols - 5/5/2015
A: The bottom covers are not a replacement part we are able to stock at this time. Sorry. You should look into getting the Pro model. It has a more durable design, so it should last longer for you.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/5/2015)
Submit an answer

Q: will this work on a wheeled walk behind trimmer. I have a new one from the Tractor Supply store and I am doing nothing but cutting the line. If this would not work do you have any suggestions as to what I can use so that I don't keep breaking the line? Thanks

Asked by: RonB - 6/12/2015
A: It will depend on the shaft design. if the existing head attaches like trimmer heads normally do, on standard models, then you should be able to get it to work. If it doesn't work out for some reason, you would be welcome to send it back as a return.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/13/2015)
Submit an answer

Q: Will this fit on a Craftsman trimmer model 316.711190 ? this trimmer does not have any nuts or bolts it has a shaft with no threads. thank you

Asked by: Dennis Allen - 6/16/2015
A: It is designed to work on trimmers with traditional style heads that are remove-able. If the head on yours does not come off to reveal a threaded bolt of some kind, then it may not be compatible.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/16/2015)
Submit an answer

Q: will the pivotrim work with mccoulough?

Asked by: trimmer guy - 6/21/2015
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/23/2015)
Submit an answer

Q: I have a solo 124 trimmer and the head for the line is old and has a half inch left handed thread where is unscrews off the shaft. Will your Pivo Trim Trimmer Head fit the Solo 124 model?

Asked by: Clayton - 6/23/2015
A: Yes. It should fit just fine.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/23/2015)
Submit an answer

Q: I have a "classic" Weedeater Model 1000, straight shaft, gas trimmer. The head drive shaft is a 10mm X 1.5 L thread. Does your kit include an adapter for this unit ?? Thanks !

Asked by: Fuzzy - 7/9/2015
A: Yes it should include the hardware you need for your model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/9/2015)
Submit an answer

Q: Will it fit on TroyBilt TB625EC?

Asked by: Vernon - 7/28/2015
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/30/2015)
Submit an answer

Q: will it work on a B&D LST 1236W 40 volt?51r

Asked by: - 9/6/2015
A: No. It only works with gas powered trimmers.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/6/2015)
Submit an answer

Q: WILL THIS WORK ON A Poulan PRO PP25SFA

Asked by: KYDALF - 4/29/2016
A: Yes. It should work just fine with your Poulan Pro Trimmer.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/29/2016)
Submit an answer

Q: How can I get JUST the cap to the pivotrim?? NOT the whole head !!

Asked by: Ken - 5/3/2016
A: Unfortunately, we do not have that part available for purchase separately. Sorry.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/13/2016)
Submit an answer

Q: We have a Remington 25cc curved shaft gas trimmer. Will it work this model?

Asked by: Joel - 5/22/2016
A: Yes. You should have no problem installing on that model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/24/2016)
Submit an answer

Q: Will the pivo trim pro work with stil fs56

Asked by: Bob - 6/3/2016
A: Yes. It should install just fine on your trimmer.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/13/2016)
Submit an answer

Q: Will this trimmer head string stand up to wire fencing, or is it likely to break off?

Asked by: John Savides - 6/14/2016
A: It works very well along fences, or up against cement sidewalks and other areas. The pivoting action will prevent breaks, and cause the line to wear very slowly. You'll be able to trim right up to the edge, but you won't have to replace line a bunch of times to do a good job. Trim like normal, and get as close as you want, but never worry about damage or line breaks.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/17/2016)
Submit an answer

Q: Will Pivotrim head work on my Troy-Bilt TB625EC gas trimmer?

Asked by: anderson - 7/11/2016
A: Yes. It'll work on your Troy Bilt trimmer.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/12/2016)
Submit an answer

Q: I have A Pivot Trimmer head how do i get my free my free life time trimmer line

Asked by: Don - 7/12/2016
A: The "free" line for life was offered via an infomercial that our company did not run. When you go to get it, they will charge you shipping. The total cost to you, after the shipping charge, is more than we charge for you to purchase the line normally. Avoid the "free stuff" gimmick, save money, and just get your replacement line from us. We carry genuine replacement line, and we have a low price guarantee on it.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/14/2016)
Submit an answer

Q: I have a Sthil FS 90R will this Pivo Trim head fit

Asked by: Mark Miller - 7/18/2016
A: Yes. It should work on that model
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/18/2016)
Submit an answer

Q: Is this compatible with a Stihl FS40?

Asked by: Rene - 7/23/2016
A: Yes. It should be compatible with that model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/24/2016)
Submit an answer

Q: Does this work on a homelite ST-175G?

Asked by: Hans - 7/30/2016
A: Yes. It should be compatible with that model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/30/2016)
Submit an answer

Q: I have a 48V Toro 13" lithium powered string trimmer m/n 51488 that has "a lot more snot" than most gas powered weed wackers. Will the PivoTrim universal replacement head adapt to this machine? I understand that the PivoTrim is usually not recomended for cordless models as MOST are considered under powered. I assure you such is NOT the case with the Toro 51488.

Asked by: Howard - 3/24/2017
A: Yes. You should be able to gt it to work on that model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (3/24/2017)
Submit an answer

Q: Will the PivoTrim work with the Homelite gas trimmer, model UT33600A ? Thanks!

Asked by: JJ - 4/9/2017
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/9/2017)
Submit an answer

Q: Will this fit craftsman 25cc curved shaft 316.711020.

Asked by: Jason - 4/10/2017
A: Yes.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/10/2017)
Submit an answer

Q: will this work on a dewalt 20vmax?

Asked by: joe - 4/17/2017
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/17/2017)
Submit an answer

Q: I have a Greenworks electric trimmer. The head looks very much like a gas trimmer. Will this pivo work on my trimmer? Thank you

Asked by: Terry - 5/13/2017
A: If it connects the same way, you should be ale to get it to work.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/13/2017)
Submit an answer

Q: Does it work on a Robi Curved shaft 4Cyl engine?

Asked by: anon - 6/18/2017
A: Yes.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/19/2017)
Submit an answer

Q: will this fit a Honda GX35

Asked by: [email protected] - 6/24/2017
A: Yes. It should attach to your Honda Trimmer without trouble.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/26/2017)
Submit an answer

Q: Will it fit a remington 2560 rustler straight shaft gas trimmer?

Asked by: Joe b - 7/9/2017
A: Yes. It should fit your Remington Trimmer.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/9/2017)
Submit an answer

Q: Will it fit Poulenc Pro curved shaft?

Asked by: Gofnutt - 7/9/2017
A: Yes it should work with that model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/13/2017)
Submit an answer

Q: Have you yet designed a PivoTrim model which is suitable for an electric strimmer, please ?

Asked by: Clifford Walters - 9/27/2017
A: Yes. The current version is compatible with most battery operated, electric string trimmers.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/28/2017)
Submit an answer

Q: Will this fit my Stihl FS 56?

Asked by: Mario - 3/27/2018
A: Yes. It is compatible with that model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (3/29/2018)
Submit an answer

Q: Will this work on an old Green Machine gas trimmer? AND can I use a heavier string than .95 ?

Asked by: Rich - 4/21/2018
A: It is compatible with Green Machine Trimmers, yes. As long as your trimmer is powerful enough, you should be able to go one size up on the line.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/21/2018)
Submit an answer

Q: Will the PivoTrimmer Head fit on my Ryobi 725r curved trimmer?

Asked by: Chris Hagelie - 6/21/2018
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/21/2018)
Submit an answer

Q: Will it work with Ryobi 725r curved shaft trimmer?

Asked by: Chris - 6/27/2018
A: Yes.It will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/30/2018)
Submit an answer

Q: I have used your head on an old weed eater...Brocken. I have a new Husquana model 322L is your head going to fit this weed eater too?

Asked by: Herm - 7/6/2018
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/6/2018)
Submit an answer

Q: will this work on a TB20CS TROYBILT?

Asked by: GENE - 7/17/2019
A: Yes. It should fit your string trimmer model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/17/2019)
Submit an answer

Q: Will it fit a craftsman electric weed whacker?

Asked by: Dale - 7/24/2019
A: Yes. It is fully compatible with newer electric models produced by Craftsman.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/25/2019)
Submit an answer

Q: WILL THIS WORK ON A BATTERY POWERED WEED EATER?

Asked by: DAVID HUNTER - 7/31/2019
A: Yes. The newest version is fully compatible with a large number of battery operated string trimmers.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/31/2019)
Submit an answer

Q: Which electric models does it work on?

Asked by: Irishgilfer - 8/17/2019
A: Install with confidence on the following models and many more:

  • Craftsman 20V

  • Dewalt 20V Max

  • Dewalt 60V Max

  • Hart 40V

  • Kobalt 40V Max

  • Kobalt 80V Max

  • Milwaukee M18 Fuel

  • Makita 18V LXT

  • Ryobi 40V

  • Ryobi ONE+ 18V


Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (8/19/2019)
Submit an answer

Q: Does this fir a Weedeater WT3100?

Asked by: Christian Ortiz - 8/18/2019
A: Yes it does.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (8/18/2019)
Submit an answer

Q: Will this fit a stihl FSA 56 electric?

Asked by: Dave - 8/31/2019
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (8/31/2019)
Submit an answer

Q: I can’t remove the pivot trim from my Ryobi trimmer curved shaft. everything turns and nothing to hold it still and I’m afraid to break the inside line that’s turns the head.. so what can I do?

Asked by: Aery - 9/1/2019
A: Make sure you are turning the right way. If you steady the nut using a wrench, you can then twist the head with your hand, and that should avoid any damage.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/4/2019)
Submit an answer

Q: Will it fit a RYOBI 4 Cycle 30 cc , straight shaft ,RY4CSS

Asked by: Randy - 1/6/2020
A: Yes. It should fit yr Ryobi gas trimmer.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (1/6/2020)
Submit an answer

Q: just gas, or battery and electric also?

Asked by: james m hoy - 2/24/2020
A: It is now compatible with a wide range of battery and electric models too.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (2/24/2020)
Submit an answer

Q: Will it fit a husqvarna 128CD gas curved shaft trimmer?

Asked by: Ronda Fulfer - 3/27/2020
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (3/27/2020)
Submit an answer

Q: Will this fit my Echo GT230 curved shaft gas trimmer with 3/8" fine threads 24T?

Asked by: Gregory Gabel - 4/11/2020
A: Yes. It'll work on your Echo trimmer.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/20/2020)
Submit an answer

Q: Will this trimmer head fit my stihl fs38 gas trimmer?

Asked by: Bob L. - 4/13/2020
A: Yes. It should be compatible with that model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/13/2020)
Submit an answer

Q: I have a DeWalt DCST 920 Type 2, 20v max XR brushless cordless 13 inch string trimmer. I would like to replace the "bump head" on the trim head and would like to know if this item can be used on my trimmer. The current head on my trimmer measures approximately 4 1/2 inches across at the point where the string passes through the trimmer head.

Asked by: Pat - 4/15/2020
A: Yes. PivoTrim is compatible with the Dewalt 20V Max. Buy with confidence.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/15/2020)
Submit an answer

Q: Will this replacement trimmer head fit a Snapper 60 volt string trimmer model ST60V?

Asked by: Marvin McBride - 4/15/2020
A: Yes it should work with your Snapper Trimmer.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/20/2020)
Submit an answer

Q: does this unit work with craftsman's weed trimmer, gas operated

Asked by: Fred J SEIDEL - 4/15/2020
A: Yes it does.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/20/2020)
Submit an answer

Q: will it work on a snapper 52755 gas trimmer

Asked by: mike - 4/21/2020
A: Yes. It should be compatible with that Snapper Trimmer model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/21/2020)
Submit an answer

Q: IS THERE REPLACEMENT LINE HOLDER FOR THESE HEADS AS IS THERE ANY RECOMMENDED MAINTENANCE FOR THE UNITS?

Asked by: M L SHAW - 4/24/2020
A: The 24 pc replacement line comes with a reusable storage container. There is no recommended regular maintenance required for this head.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/24/2020)
Submit an answer

Q: can this trim head be used with craftsman trimmer

Asked by: fred seidel - 4/29/2020
A: Yes. The PivoTrim replacement head is compatible with Craftsman String Trimmers.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/29/2020)
Submit an answer

Q: Will this fit on my Makita with right hand thread

Asked by: Mark - 4/29/2020
A: Yes it will. PivoTrim is compatible with Makita.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/30/2020)
Submit an answer

Q: will this fit a craftsman 358798520 curved shaft

Asked by: kenny - 5/1/2020
A: Yes.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/1/2020)
Submit an answer

Q: Will this fit a Poulan pro 25

Asked by: Chris - 5/9/2020
A: Yes.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/9/2020)
Submit an answer

Q: PR 28 Poulan Pro will this fit this weed eater

Asked by: Chris - 5/9/2020
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/11/2020)
Submit an answer

Q: Will this trimmer head fit a Torro trimmer?

Asked by: Floyd Deaton - 5/13/2020
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/13/2020)
Submit an answer

Q: will this head fit a Echo trimmer?

Asked by: Floyd Deaton - 5/13/2020
A: Yes. It fits Echo Trimmers.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/13/2020)
Submit an answer

Q: Will this fit a echo 2100 gas trimmer

Asked by: Alice H Renfro - 5/14/2020
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/15/2020)
Submit an answer

Q: I do not see Honda listed as one of the trimmers it says it fits. I have a Honda HHT35S will it fit my trimmer?

Asked by: Holocky - 5/17/2020
A: Yes. PivoTrim is compatible with Honda Trimmers.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/17/2020)
Submit an answer

Q: Will it fit a HUSQVRANA 326L

Asked by: otis w - 5/17/2020
A: Yes. It should work on that model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/17/2020)
Submit an answer

Q: Will the head fit on Milwaukee 18 volt weed eater

Asked by: Donnie R. Ware - 5/23/2020
A: Yes. PivoTrim works with the Milwaukee M18 Fuel String Trimmer.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/23/2020)
Submit an answer

Q: Will this trimmer head work on my Yard Machines Model #41AD110G900 gas trimmer??

Asked by: Diane Beach - 5/27/2020
A: Yes. You should have good luck installing it on that model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/30/2020)
Submit an answer

Q: Have old ECHO GT1000 trimmer needing a string head. What might you have that would work with it? SN: 0039160

Asked by: J.McGlinnen - 5/27/2020
A: The PivoTrim should install on that model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/27/2020)
Submit an answer

Q: Where can I buy one pivo trimer head trimmer

Asked by: Eliseo Yarrito - 6/3/2020
A: The best place to get it is to order directly from us. Feel free to call and order by phone if you prefer.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/13/2020)
Submit an answer

Q: Can the string eyelets be purchased at any hardware stores??

Asked by: Jeff Johnson - 6/10/2020
A: Replacement eyelets are no longer available. Sorry. If you get a new head, you'll notice that the pivots have been redesigned with metal reinforcement to make them last longer, and cause replacement to be unnecessary.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/13/2020)
Submit an answer

Q: Can I use this as a replacement head for a kobalt 40 battery/electric trimmer

Asked by: Robert - 6/14/2020
A: Yes you can. It'll work perfectly.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/14/2020)
Submit an answer

Q: Will this fit Hitachi straight shAft

Asked by: Jeff - 6/26/2020
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/26/2020)
Submit an answer

Q: Will this fit a stihl fs50c?

Asked by: David - 7/22/2020
A: es. It should work with your Stihl Trimmer Model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/22/2020)
Submit an answer

Q: The little red string holders - 2 have broken. Are there replacements?

Asked by: Karen - 7/29/2020
A: The string holders are no longer available as a replacement part. New versions of the head have metal reinforced pivots to avoid the need to replace them.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/29/2020)
Submit an answer

Q: Will it fit my Kobalt 40v max weed eater?

Asked by: Timothy Bowen - 8/2/2020
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (8/2/2020)
Submit an answer

Q: I need something that fits an older Ryobi...I tried a "trimmer head proferssional" and the nut was too big

Asked by: wayne - 8/5/2020
A: This head comes with a variety of nuts and other hardware to ensure compatibility on most models. It should come complete with the right size nut for your model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (8/5/2020)
Submit an answer

Q: will it fit homelite model ut22600

Asked by: edward fero - 8/8/2020
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (8/10/2020)
Submit an answer

Q: Are replacement eyelets available?

Asked by: Ray S - 8/18/2020
A: Replacement eyelets are no longer available. New versions of the head have metal reinforced eyelets to prevent wear.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (8/18/2020)
Submit an answer

Q: Do you have a pivot rim with 4 strings

Asked by: Jerry Wakefield - 9/24/2020
A: The current version has three strings.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (9/24/2020)
Submit an answer

Q: What is the thread size? Is is RH or LH ?

Asked by: Dennis - 10/11/2020
A: The head itself is not threaded. It comes complete with a range of hardware to adapt to different size shafts, and those with right or left-handed threads.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (10/11/2020)
Submit an answer

Q: What keeps the head from slipping and the bold coming loose?

Asked by: Gordon - 10/13/2020
A: The overall design of the head prevents this. Once installed correctly, you'll never have to worry about it slipping or getting loose.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (10/13/2020)
Submit an answer

Q: will this part fit a craftsman trimmer

Asked by: Thomas Edward Beavers - 4/4/2021
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (4/6/2021)
Submit an answer

Q: Will this product fit a stihl gas weed eater

Asked by: Rhonda - 5/6/2021
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/10/2021)
Submit an answer

Q: will this unit fit battery powered weedwhackers

Asked by: John Hawkins - 5/25/2021
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (5/25/2021)
Submit an answer

Q: Will it fit on a Makita E2650LH

Asked by: Phil - 6/22/2021
A: Yes it will.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (6/26/2021)
Submit an answer

Q: Will this fit a Kobalt 40 watt straight shaft trimmer?

Asked by: Mac - 7/6/2021
A: Yes. It fits that model for sure.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/6/2021)
Submit an answer

Q: How do you order more strings

Asked by: Kathy Gibson - 8/7/2021
A: You ca get more here: https://www.simplygoodstuff.com/pivotrim_line-24.html
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (8/10/2021)
Submit an answer

Q: The plastic string holder wears out fast on the edge when trimming heavy brush allowing the string to come out of the slot . Need the string holder to be made completely of stainless steel. This would make it last longer. Something to consider in the future '

Asked by: Jerry Richardson - 10/28/2021
A: Yes. The newest version of the head has stainless steel reinforcement to prevent this exact problem. Thanks for the feedback!
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (10/28/2021)
Submit an answer

Q: will this work on a Stihl Curved shaft FS 40C

Asked by: Richard Nelson - 7/11/2022
A: Yes. It should work on that model.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: simplygoodstuff (7/13/2022)
Submit an answer