buy today and savebuy today and save

V-Slicer Blade Inserts

Additional Julienne Blades For Your Borner V Slicer.
Additional Blades For Your Borner V-Slicer
Additional Blades For Your Borner V-Slicer
1.6mm Blade Insert.
10mm Blade Insert.
Close Up View. 1.6mm Blades.
Average Rating
3 Review(s) | Rate & Review | 4 Question(s)
$4.04 (31%)
Quantity Your Price
2 - 3 $8.50 each
4+ $8.00 each
Stuff Points: Earn 9 points when you buy this stuff.
Reward Point Details
Product ID: KI1001EB
Usually Ships Within 24 Hours.

Product Description

Make the most useful tool in your kitchen even more valuable with these additional blades. They are a different size from the ones that come with the Borner V-Slicer when you buy it new, so if you get them both, you will have a total of four different sizes to choose from. This will easily prepare you for virtually any chopping, dicing, or julienne task that comes up. One is smaller and one is larger, so you really increase the range of your cutting ability. The smaller blade is a 1.6mm. It is a thin julienne blade that will allow you to do a very thin julienne cut. Some refer to it as a matchstick cut, but basically it will do a thick shred on any vegetable. This makes it perfect for preparing salads, garnishes and more. The thicker blade is a 10mm. This rather large blade is 3mm thicker than the widest blade included with the V-Slicer, and it will allow you to cut thick strips and large chunks from your favorite fruits and vegetables. Use this blade to make veggie sticks for an appetizer, or even make your own steak fries at home. There are all sorts of different tasks you will be able to accomplish with the addition of these blades. They work just like the ones that came with the slicer, but they are a different thickness. Simply slip one in and cut away. Order Yours Today!

PLEASE NOTE: These are not replacement blades. They are a different size than the ones that come with the V-Slicer. They are only compatible with the original Borner V-slicer, and do not work with the newer V-Power Model.

Product Specifications

Includes: (1) additional blade for your V-Slicer
Dimensions 8.5" x 4"
Size 1.6mm or 10mm
Color white
Insert Material High Quality Plastic
Blade Material Stainless Steel
Compatibility Works with the Original Borner V-Slicer
Washable Yes (dishwasher safe)
Manufacturer Borner
Shipping Weight .2 lbs.

Borner V-Slicer Blades - Increase the usefulness of your Borner V-Slicer. These two inserts are a different size than the blades that come with the V-slicer.

Product Reviews

Average Rating:
Average Rating
This stuff is rated:
5 out of 5
Review Count:
3 Review(s)
Add your own:
Write a Review


5 out of 5
Great Product, Great Company
These little inserts are just perfect. They pop right into the Bourne V Slicer. The sizes allow for much more versatility in all slicing. The package arrived super fast, within just a few days after ordering. Great company. Would do business with again. Recommended.
Reviewed by: on
Was This Helpful?  or   | 5 of 7 Found It Helpful
5 out of 5
KI1001EB2 V-Slicer Blade Insert 10mm
Simplygoodstuff is the only place you can purchase extra blades for your V-Slicer. This is a great addition to your Borner V-Slicer. Will purchase the 1.6mm blade as soon as it's available again!
Reviewed by: on
Was This Helpful?  or 
5 out of 5
Got this to go with the V-Prep Mandoline Slicer (7 Piece Set)!
This is a great size for French fries - better than the 7mm julienne slicer. Note that it is an "off-white" color. The V-Prep Mandoline Slicer (7 Piece Set) is a good white color. Perhaps overtime, they will all be the same "off-white" color. Also, note that it fits in the covered box.
Reviewed by: on
Was This Helpful?  or 

Product Questions

4 Question(s) So Far...
Have a question about this stuff? Ask Now.
Are these blade inserts compatible with the Borner V-Power slicer too?
Asked by:  on 9/1/2014
No They are not.
Answer provided by: on 9/2/2014
Was this answer helpful?
2 of 3 Customer(s) found this Answer helpful.
Is the 10mm blade compatible with the v-prep mandoline slicer from swissmar?
Asked by:  on 12/22/2014
Yes it is.
Answer provided by: on 12/22/2014
Was this answer helpful?
2 of 2 Customer(s) found this Answer helpful.
Are these blades compatible with the original Borner V Slicer that I purchased back in 1986?
Asked by:  on 8/1/2015
Yes they are.
Answer provided by: on 8/1/2015
Was this answer helpful?
2 of 2 Customer(s) found this Answer helpful.
Would the wides insert be as wide as one thinks of when wanting to make french fries? The original inserts make them too thin for me.
Asked by:  on 4/15/2015
Yes. That's what most people use the 10mm blade for.
Answer provided by: on 4/15/2015
Was this answer helpful?
1 of 2 Customer(s) found this Answer helpful.
Have a question about this stuff? Ask Now.
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Simply Good Stuff Inc BBB Business Review
Nextag Seller
Read Store Reviews
Copyright © 2006- Simply Good Stuff, Inc. All Rights Reserved.