Clean & dry the
device's surface. The mobile device, the ClipHanger and
the tape should be room-temperature.
Remove one side of the tape backing and
attach to the Clip Hanger. Press firmly.
Locate the top of Clip Hanger above the
device's edge to allow enough room for a finger or thumb
to slip through the loop.
Remove other side of tape backing and position
ClipHanger in place. Press firmly.
Note: Adhesive tape offers a one-time
bond. If the ClipHanger needs to be removed, rotate with a constant,
firm, twisting motion. The tape will not damage or mark the device,
but it cannot be reapplied.
Hang Cliphanger where you need it:
To hold your device
with the aid of the Clip Hanger, simply put your finger
through the loop. ClipHanger's shape and size accommodates
a comfortable grip.
To hang Clip Hanger, place the device
in your right hand. Flex the free end of the ClipHanger
away from the device by pushing it with your index finger
or thumb, as shown at right. Put the free end through
your pant loop or purse strap.
To remove/uhook the ClipHanger, pull
your device up and away from your pant loop or purse
strap. The end of the ClipHanger will flex and slide
191 W Main St.
Webster NY 14580